Wednesday, November 30, 2011

Heat Pumps May Be Better Heating and Cooling Option than Furnace or Air Conditioner


Heat pumps are often misunderstood; homeowners may not realize that there may be a better heating and cooling option than a furnace or air conditioner.

Although its name is misleading, a heat pump is an efficient method of heating a home during the cold winter months and cooling it during the blistering summer months.

Whether its winter or summer, a heat pump works by moving heat to keep indoor environments comfortable. During the winter, heat is collected from the outside and used to warm the air inside. Even "cold" air contains heat. In the summer, a heat pump operates like a standard electric air conditioner. It collects heat from the air within a home and expels it outside.

Heat pumps are capable of providing years of worry-free heating and cooling and significant savings on electric bills. The amount a homeowner can save depends on many factors. For example, the efficiency of old equipment compared to that of a new heat pump can have an effect on how much will be saved. The climate in which we live, as well as electric rates are also factors.

While many people find the winter operation of a heat pump difficult to understand, it is during the heating cycle that the heat pump produces the most savings. Unlike a furnace that turns fossil fuel or electricity into heat, the heat pump collects heat that already exists in the outdoor air by means of its refrigeration cycle.  Therefore, a heat pump will produce two to three times more heat than the energy it uses.

A heat pump also produces savings while cooling a home. A SEER (Seasonal Energy Efficiency Ratio) rates cooling efficiency. A higher SEER produces greater savings. A  SEER of 7.0 is typical in homes over eight years old and a new, higher efficiency heat pump can be as much as 56 percent more efficient.

If your old non-electric furnace is still working, an add-on heat pump is an effective option. With a dual fuel system, the two systems share the heating load, but never at the same time. Each system operates when it is the most cost effective. The heat pump will be the primary heating and cooling system. However, when the temperature drops below the heat pump’s set point, the furnace will take over until the temperature rises enough for the heat pump to operate more efficiently.

To find out more information about how you can save on energy costs, call Josh Robertson at Carbon Valley Heating and Air – 303-833-4466. Carbon Valley Heating and Air has been providing service in the Carbon Valley area since 1999.


Friday, November 18, 2011

Heating Season

It is definitely furnace season! What are some common heating problems? There are hundreds of reasons your furnace may need to be repaired. The most common problems are:
  • ·        Lack of maintenance – this causes unexpected breakdowns, increased energy costs and it could be dangerous as temperatures in the home drop.
  • ·        Pilot or ignition issues – signs of this would be intermittent or no heat
  • ·        Dirty filters – this limits the air flow.
  • ·        Air Flow issues – fan motors, belts or bearings could cause the furnace to overheat.
  • ·        Thermostat malfunctions – this causes fan problems, no heat or comfort issues.

Having a Tune-Up could prevent nearly all heating problems. All components are checked and serviced to ensure they are operating correctly and at peak efficiency. Important things like Carbon Monoxide and combustion air need to be checked as well as equipment safety. Always remember that the age may pose safety hazards. To ensure that your home is safe be sure that your equipment is service by a NATE-certified technician.